blevins321
Apr 26, 09:34 AM
Quick update. I've made some more progress. I thought I had not been able to get the phone into DFU mode. I tried it a few more times (the steps of how to get it into DFU mode) and finally its restoring. My phone is staying on with the Plug into iTunes screen. will update once it is done restoring and installing the firmware.
edit: blevins just to be safe I took the sim out and made sure it was seated properly. thank you for the reply
edit2: it says the iPhone "iPhone" could not be restored. An unkown error occurred (1604)
If it's in DFU mode, there should be nothing on the screen. It's in recovery mode, not DFU. 1604 is a common problem when restoring in non-DFU mode.
edit: blevins just to be safe I took the sim out and made sure it was seated properly. thank you for the reply
edit2: it says the iPhone "iPhone" could not be restored. An unkown error occurred (1604)
If it's in DFU mode, there should be nothing on the screen. It's in recovery mode, not DFU. 1604 is a common problem when restoring in non-DFU mode.
jessica.
Aug 21, 09:21 PM
SecondSpin.com. I'd spend hours in the store in Costa Mesa, I've sold hundreds of CDs to them and bought some back.
ddtlm
Oct 2, 02:55 PM
Hemingray:
Yeah I was a bit unimpressed by the way they arranged the disks too. Perhaps I would like it more if I had a chance to open one of the new cases up.
The large heatsink could have been a huge improvement, however apparently Apple didn't use it to lower sound levels very much. Such am elaborate case, and they can't be bothered to make it quiet.
Yeah I was a bit unimpressed by the way they arranged the disks too. Perhaps I would like it more if I had a chance to open one of the new cases up.
The large heatsink could have been a huge improvement, however apparently Apple didn't use it to lower sound levels very much. Such am elaborate case, and they can't be bothered to make it quiet.
jiminaus
Apr 24, 07:51 AM
Basically you are freeing memory you did not malloc/calloc.
Actually there is a malloc, it's embedded in the memcpy.
void *pointerGivenByInstanceFunction = memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);
EDIT: Sorry ignore that. It's the "read out values bis" loop that's the problem.
Yes it's as robbieduncan says. In your one-line version, you're losing the pointer the copy of the double on the heap. Then later you try to pass the address of the copy on the stack to free, which rightly causes a crash.
Basically you can't do this in one line. You could, though, cast directly to a double pointer and still free it, like so:
double *pointerGivenByInstanceFunction = (double *)memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);
double returnElement = *pointerGivenByInstanceFunction;
NSLog(@"%g",returnElement);
free(pointerGivenByInstanceFunction);
Actually there is a malloc, it's embedded in the memcpy.
void *pointerGivenByInstanceFunction = memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);
EDIT: Sorry ignore that. It's the "read out values bis" loop that's the problem.
Yes it's as robbieduncan says. In your one-line version, you're losing the pointer the copy of the double on the heap. Then later you try to pass the address of the copy on the stack to free, which rightly causes a crash.
Basically you can't do this in one line. You could, though, cast directly to a double pointer and still free it, like so:
double *pointerGivenByInstanceFunction = (double *)memcpy(malloc(byteSizeOfElement),storage+i*byteSizeOfElement,byteSizeOfElement);
double returnElement = *pointerGivenByInstanceFunction;
NSLog(@"%g",returnElement);
free(pointerGivenByInstanceFunction);
more...
alacava
Jul 10, 08:36 PM
I'll be there, but have to go to work after, so I will be there a bit after 8.
hob
Oct 16, 06:48 PM
http://att.macrumors.com/contest/61A95A.mov
more...
MacSignal
Dec 29, 03:18 PM
According to Wikipedia (http://en.wikipedia.org/wiki/ExFAT), Apple added exFat support to 10.6.5 in November.
Poisoned1
May 4, 09:44 PM
Well, if you don't need edit away from home the iMac would be better just cause of it's specs and screen size. The macbook air would work if you needed to edit on-the-go. Also if you have a large amount of photos/videos the iMac could hold it all. With the mba you most likely would need to bring along a portable external hdd.
more...
LarryC
Apr 26, 09:38 AM
I'm sorry about that. It is fixed now.
eawmp1
May 7, 02:28 AM
Because they are using the illegal tethering issue to force people off grandfathered unlimited data plans. And to collect the legal tethering fees. You just put a block on there and they've got no leverage.
more...
LethalWolfe
Apr 7, 04:23 PM
Leaked... With intro and everything! Pretty amazing how leaked videos are so polished. ;)
Just because it was intended for in-house or business-to-business use doesn't mean it has to look like crap. We produce a fair amount of in-house promos that either go to the marketing/sales reps or get shown off to the suits up stairs and the videos look as slick as anything you'd see on TV.
Lethal
Just because it was intended for in-house or business-to-business use doesn't mean it has to look like crap. We produce a fair amount of in-house promos that either go to the marketing/sales reps or get shown off to the suits up stairs and the videos look as slick as anything you'd see on TV.
Lethal
balamw
Mar 23, 12:38 PM
There was a recent thread where someone posted the XML link to two full copies of the drivers. You may be able to pull the drivers out of one of those packages. (LINK: http://forums.macrumors.com/showthread.php?t=892725)
Do you happen to have an Apple remote? You can bring up the boot loader by holding play during boot.
EDIT: 7-zip can get you into a pkg file.
B
Do you happen to have an Apple remote? You can bring up the boot loader by holding play during boot.
EDIT: 7-zip can get you into a pkg file.
B
more...
Dreadnought
Mar 27, 04:40 PM
There were only two or three simulations worth 1700 points and they're not PS3 WUs. A C2D can handle one of the big mothers in a little over a day. The PS3 is currenlty chomping on some ~300 pt WUs that take between 6-8 hours to wrap up.My C2D at work is taking 25 hours for a WU that is only worth 186, this is per core. So the PS3 is way more powerfull, but what do you want with 7 cores, each 3.2 GHZ and working together on one WU.
arn
Nov 1, 02:41 PM
http://guides.macrumors.com/Mac_Guides:ProposedCategories
Post or edit the categories as you would like.
Remember, we can have more than one heirarchical category system. We just need to firm up the top categories.
arn
Post or edit the categories as you would like.
Remember, we can have more than one heirarchical category system. We just need to firm up the top categories.
arn
more...
bmservice
Apr 27, 04:02 AM
I just got the iPhone 4 for Verizon and I usually would let my phone die all the way and then charge it for 12 hours to get it completely charged. Is it the same for the iPhone 4 or does it not matter? If it does matter is it longer than 12 hours? Also, can leaving your phone plugged in when it is fully charged hurt it? Thanks!
Just charge it freely.Most mobile phones now use lithium batteries as power supply. So you are not necessary to overcharge it at all. Don't worry that it will do some harm to your battery.
Just charge it freely.Most mobile phones now use lithium batteries as power supply. So you are not necessary to overcharge it at all. Don't worry that it will do some harm to your battery.
happle
Jan 3, 09:50 PM
here's what i have. everything was cheap but also good for a beginner setup. and i did a lot of research before i purchased everything, and i couldnt be happier.
- M-Audio Axiom 25 - The Axiom is very nice and has more features than the Oxygen, you can find one for a good price used on ebay.
- M-Audio Fast Track USB II Audio Interface - get one on amazon, you will need an interface eventually
- Sennheiser HD280 Pro Headphones - you will need them for mixing accurately. get them on amazon, you will not find a better pair of studio headphones for this price.
- Klipsch Promedia 2.1 Computer Speakers - THX certified...decent quality, good to check your mixes on, and good to listen to house or any music on. They have good bass and get very loud. All for a great price. I personally make dubstep so i need the bass.
- Your DAW of choice, mines Reason 5.
- M-Audio Axiom 25 - The Axiom is very nice and has more features than the Oxygen, you can find one for a good price used on ebay.
- M-Audio Fast Track USB II Audio Interface - get one on amazon, you will need an interface eventually
- Sennheiser HD280 Pro Headphones - you will need them for mixing accurately. get them on amazon, you will not find a better pair of studio headphones for this price.
- Klipsch Promedia 2.1 Computer Speakers - THX certified...decent quality, good to check your mixes on, and good to listen to house or any music on. They have good bass and get very loud. All for a great price. I personally make dubstep so i need the bass.
- Your DAW of choice, mines Reason 5.
more...
DaiKirai
Feb 16, 02:55 PM
:rolleyes: I don't want to sound patronizing, but you didn't get TBP by accident when you installed FF on your Mac, because TBE is not in the extensionroom, did you? That would explain why a lot of the options are missing. :D But it sounds like you know too much to get caught by that one.
Yeah, that's it. The comments in the extensionroom seemed to claim that TBP had exactly the same features, but was less buggy. I guess they were wrong.
The only part of it I use is the forcing of new windows to open as new tabs instead, so there wasn't any visible difference to me.
Yeah, that's it. The comments in the extensionroom seemed to claim that TBP had exactly the same features, but was less buggy. I guess they were wrong.
The only part of it I use is the forcing of new windows to open as new tabs instead, so there wasn't any visible difference to me.
obeygiant
Oct 5, 10:58 PM
How do you use the knife part, and how does it not slice your mouth open?
I suppose the knife part is on the side and I guess you just have to be careful not to cut the side of your mouth open. I doubt its that sharp tho. I'm yet to use or to find one of these in the wild.
I suppose the knife part is on the side and I guess you just have to be careful not to cut the side of your mouth open. I doubt its that sharp tho. I'm yet to use or to find one of these in the wild.
applemacdude
Sep 8, 12:18 PM
No one>?
Nereus
Dec 16, 05:37 PM
Without knowing more about your situation, I would suggest that you re-setup your airport from your PB15 using the utility.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
How do I re-setup it? The problem seems to be that it can't find any networks anymore. The reception is zero.
Of course you will need to know the original settings for your ISP before you try this.
Sushi
How do I re-setup it? The problem seems to be that it can't find any networks anymore. The reception is zero.
Hemingray
Sep 17, 07:55 PM
Where are you getting this $500 figure? The Dual gig is $2499 and the dual 1.25 gig is $3299.
I can see your $500 price difference is if you upped the RAM in the dual gig model to 512MB (+$200) and the hard drive to 120 (+$100) to match all the specs of the 1.25 model. Is that what you meant?
For the extra $500 you get basically an extra 250MHz per processor and an extra 1MB of L3 cache. And bragging rights of having the fastest PowerMac until the next revision. But I never personally purchase the highest model available. I would consider waiting until the benchmark results come out against the two models, that would help to determine if the extra $500 is worth it.
I can see your $500 price difference is if you upped the RAM in the dual gig model to 512MB (+$200) and the hard drive to 120 (+$100) to match all the specs of the 1.25 model. Is that what you meant?
For the extra $500 you get basically an extra 250MHz per processor and an extra 1MB of L3 cache. And bragging rights of having the fastest PowerMac until the next revision. But I never personally purchase the highest model available. I would consider waiting until the benchmark results come out against the two models, that would help to determine if the extra $500 is worth it.
s2dio
Apr 24, 02:50 PM
Does anyone have the manual for the 11" MBA ? Great Post ! :D
Since the 11" and 13" are almost identical, I suppose that the technician guide mentioned here applies to both.
Since the 11" and 13" are almost identical, I suppose that the technician guide mentioned here applies to both.
Sun Baked
Oct 2, 10:53 AM
The new one has some improvements in internal layout, cooling, and expandability.
If you do not plan on upgrading the machines while you own them -- then buying on cost alone shouldn't be much of a problem during ownership, since performance is similar.
However, if you plan on doing a lot of heavy optical burning (or see the need to keep optical up-to-date or need more than one), if you see the need a bunch of HDs, or you plan on keeping the CPU up-to-date -- then the newer one may make a little more sense.
If you do not plan on upgrading the machines while you own them -- then buying on cost alone shouldn't be much of a problem during ownership, since performance is similar.
However, if you plan on doing a lot of heavy optical burning (or see the need to keep optical up-to-date or need more than one), if you see the need a bunch of HDs, or you plan on keeping the CPU up-to-date -- then the newer one may make a little more sense.
swindmill
Sep 14, 09:31 AM
VW Touareg
VW New Beetle
VW Passat (Soon the New model)
and the VW Jetta.
840
Is the MkV Golf not available with a TDI? I know the MkIV offered it. I am currently looking to get rid of my MkIV Jetta 1.8t for a MkIV Golf TDI
VW New Beetle
VW Passat (Soon the New model)
and the VW Jetta.
840
Is the MkV Golf not available with a TDI? I know the MkIV offered it. I am currently looking to get rid of my MkIV Jetta 1.8t for a MkIV Golf TDI
No comments:
Post a Comment